2011-2016 FJ Cruiser · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Jul 2014 from Aug 2014


1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

  1. A226977E01
    Install a new gasket to the sensor.
    Text in Illustration 
    *a
    New Gasket

  1. Using a 19 mm deep socket wrench, install the sensor.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the sensor connector.


2. INSTALL INTAKE MANIFOLD
  1. Install the intake manifold (Click here).

← INSTALLATION (Aug 2009 – Jul 2014)COMPONENTS (Jul 2007 – Jul 2009) →