REMOVAL
Removal / installation · Vehicles built Nov 2010 – Jul 2012
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012
| 1.
REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY
|
 |
- Disengage the 4 claws.
Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 guides and remove the parking brake hole cover.
| 2.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
|
 |
- Remove the shift lever knob.
| 3.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
|
 |
- Remove the shift lever knob.
| 4.
REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
|
 |
- Shift the shift lever into the N position.
Disengage the 5 clips and 3 guides and remove the console upper rear panel.
| 5.
REMOVE YAW RATE AND DECELERATION SENSOR (for Automatic Transmission) |
 |
Disconnect the yaw rate and deceleration sensor connector.
Remove the 2 bolts and the yaw rate and deceleration sensor.
Disengage the clamp from the sensor bracket.
| 6.
REMOVE YAW RATE AND DECELERATION SENSOR (for Manual Transmission) |
 |
Disconnect the yaw rate and deceleration sensor connector.
Remove the 2 bolts and the yaw rate and deceleration sensor.