2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


POWER DOOR LOCK CONTROL SYSTEM DESCRIPTION
  1. The power door lock system locks/unlocks all the doors simultaneously.
    The door control switch of the power window regulator master switch assembly or door control switch assembly*1 sends lock/unlock request signals to the main body ECU. Then, the main body ECU sends these requests to the lock motors in each door to lock/unlock all the doors simultaneously.
    Operating the driver side door or front passenger side door, or back door lock using a key sends lock/unlock request signals to the main body ECU.

    1. *1: for LHD


FUNCTION OF MAIN COMPONENTS
Component
Function
Power window regulator master switch assembly (door control switch)
Locks or unlocks all doors.
Door control switch assembly*1
Locks or unlocks all doors.
Door courtesy switch
  1. Located on each door.
  1. Detects door status (open or closed) and outputs data to main body ECU.
  1. Turns on when door is open and off when door is closed.
Front door lock assembly
  1. Built-in motor locks or unlocks door.
  2. Built-in door lock and unlock switch (key-linked) detects door lock status (locked or unlocked) and outputs data to main body ECU.
  3. Built-in unlock detection switch detects door status (locked or unlocked) and outputs data to main body ECU. This switch turns off when door is locked and on when door is unlocked.
Back door lock assembly
  1. Built-in motor locks or unlocks door.
  2. Built-in unlock detection switch detects door status (locked or unlocked) and outputs data to main body ECU. This switch turns off when door is locked and on when door is unlocked.
Back door lock cylinder
Built-in door lock and unlock switch (key-linked) detects door lock status (locked or unlocked) and outputs data to back door ECU.
  1. *1 for LHD

DESCRIPTION
  1. This system is controlled by the main body ECU. The main body ECU outputs signals to each door lock motor.
    The door lock control system in the vehicle has the following functions:

    Function
    Outline
    Manual lock and unlock function
    This function locks or unlocks all doors according to the door control switch of power window regulator master switch assembly or door control switch assembly*1 operation.
    Key-linked lock and unlock function
    This function, which is linked with the mechanical key cylinder, locks or unlock all doors when a lock or unlock operation is effected.
    Key lock-in prevention function
    When key is inserted in ignition key cylinder and door lock operation is performed, all doors are unlocked.
    1. *1 for LHD

← SYSTEM DESCRIPTION (Jul 2007 – Oct 2010)HOW TO PROCEED WITH TROUBLESHOOTING (Jul 2007 – Oct 2010) →