INSTALLATION
Removal / installation · Vehicles built Nov 2010 – Jul 2012
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012
| 1.
PRECAUTION |
 |
- CAUTION:
- Read "PRECAUTION" thoroughly before servicing (Click here).
| 2.
INSTALL FRONT PASSENGER AIRBAG ASSEMBLY |
 |
- Engage the 5 hooks.
Engage the 5 hooks and install the front passenger airbag assembly onto the instrument panel.
- Install the 2 screws.
| 3.
INSTALL DEFROSTER NOZZLE ASSEMBLY
|
 |
Engage the 9 claws and install the defroster nozzle.
Install the 5 <A> screws.
| 4.
INSTALL NO.1 SIDE DEFROSTER NOZZLE DUCT
|
 |
Engage the 2 claws and install the side defroster nozzle duct.
Install the screw <A>.
| 5.
CONNECT INSTRUMENT PANEL WIRE ASSEMBLY |
 |
- Install the 3 clamps.
Connect the 2 connectors to the front passenger airbag assembly.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
| 6.
INSTALL INSTRUMENT PANEL SUB-ASSEMBLY |
 |
- HINT:
- Refer to the procedures from "INSTALL INSTRUMENT PANEL SUB-ASSEMBLY" (Click here).
| 7.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 3.9 N*m{
40 kgf*cm
, 35 in.*lbf
}
| 8.
PERFORM INITIALIZATION |
 |
Perform initialization (Click here).
- HINT:
- Some systems need initialization after reconnecting the cable to the negative battery terminal.
| 9.
INSPECT SRS WARNING LIGHT |
 |
Inspect the SRS warning light (Click here).