2011-2016 FJ Cruiser · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built Jul 2007 – Jul 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


INSPECT WATER INLET WITH THERMOSTAT

A075918E01

HINT:
The valve opening temperature is inscribed on the thermostat.

  1. A075919E01
    Immerse the thermostat in water, then gradually heat the water.

  1. Check the valve opening temperature of the thermostat.

    Valve opening temperature:
    80 to 84°C (176 to 183°F)

    If the valve opening temperature is not as specified, replace the thermostat.

  1. A075920E02
    Check the valve lift.

    Valve lift:
    8.0 mm (0.31 in.) or more at 95°C (203°F)

    If the valve lift is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat is at low temperatures (below 77°C (171°F)).
    If not fully closed, replace the thermostat.

← REMOVAL (from Aug 2014)INSPECTION (from Aug 2009) →