2011-2016 FJ Cruiser · Service Manual BRAKE

INSTALLATION

Removal / installation · Vehicles built from Jul 2007


1. INSTALL FRONT SPEED SENSOR
  1. Hexagon socket head bolt type:

    1. Using a 5 mm hexagon wrench, install the front speed sensor with the bolt.

      Torque:
      8.3 N*m{ 85 kgf*cm , 73 in.*lbf }

      NOTICE:
      Make sure that the sensor tip is clean.

  1. Hexagon head bolt type:

    1. Install the front speed sensor with the bolt.

      Torque:
      8.5 N*m{ 87 kgf*cm , 75 in.*lbf }

      NOTICE:
      Make sure that the sensor tip is clean.

  1. Connect the skid control sensor connector.


2. INSTALL FRONT WHEEL

Torque:
112 N*m{ 1137 kgf*cm , 82 ft.*lbf }


3. CHECK VSC SENSOR SIGNAL
(Click here)
← INSPECTION (from Jul 2007)COMPONENTS (from Jul 2007) →