INSTALLATION
Removal / installation · Vehicles built from Jul 2007
| 1. INSTALL REAR SPEED SENSOR |
![]() ![]() |
Install the rear speed sensor with the nut.
- Torque:
- 8.3 N*m{ 85 kgf*cm , 73 in.*lbf }
- NOTICE:
- Make sure that the sensor tip is clean.
Connect the skid control sensor wire.
| 2. INSTALL REAR WHEEL |
- Torque:
- 112 N*m{ 1,137 kgf*cm , 82 ft.*lbf }
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 3.9 N*m{ 40 kgf*cm , 35 in.*lbf }
| 4. CHECK VSC SENSOR SIGNAL |


