2011-2016 FJ Cruiser · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Jul 2007


1. REMOVE FRONT WHEEL

2. REMOVE FRONT SPEED SENSOR

C133068
  1. Disconnect the skid control sensor connector.

  1. Hexagon socket head bolt type:

    1. Using a hexagon wrench 5 mm, remove the bolt and the front speed sensor.

      NOTICE:
      1. Do not allow any foreign matter to adhere to the sensor tip.
      2. Ensure that no foreign matter enters the sensor installation part.

  1. Hexagon head bolt type:

    1. Remove the bolt and the front speed sensor.

      NOTICE:
      1. Do not allow any foreign matter to adhere to the sensor tip.
      2. Ensure that no foreign matter enters the sensor installation part.

← COMPONENTS (from Jul 2007)INSPECTION (from Jul 2007) →