DATA LIST / ACTIVE TEST
System information · Vehicles built from Aug 2008
- HINT:
- By accessing the DATA LIST displayed on the intelligent tester, values of switches and sensors can be read without removing any parts. Reading the DATA LIST is the first step of troubleshooting and is one method shortening diagnostic time.
| DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY |
Warm up the engine.
Turn the ignition switch off.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the tester on.
Enter the following menus: Body Electrical / SRS Airbag / Data List.
According to the display on tester, read the "Data List".
SRS Airbag: Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Driver Seat Position
Seat position (Driver side)/
Forward: Seat position is forward
Bkward: Seat position is backward
FAIL: Failure detected
Forward/Bkward
-
Passenger Classification
Front passenger classification/
NG: Data is not determined
OFF: Vacant
Child: Child (Less than 36 kg [79.37 lb]) is seated
AF05: Adult (36 to 54 kg [79.37 to 119.05 lb]) is seated
AM50: Adult (More than 54 kg [119.05 lb]) is seated
Fail: A failure is detected
NG/OFF/Child/AF05/AM50/Fail
-
Drive Buckle SW
Driver seat belt buckle switch/
Unset: The seat belt is not fastened
Set: The seat belt is fastened
NG: Data is not determined
Unset/Set
-
Passenger Buckle SW
Passenger seat belt buckle switch/
Unset: The seat belt is not fastened
Set: The seat belt is fastened
NG: Data is not determined
Unset/Set
-
Display Type Information
Display type identification information/
LR: Display indicated by LH/RH
DP: Display indicated by Driver/Passenger
DP
-
Number of Past DTC
Number of past DTCs/
Min.: 0, Max.: 255
0
-