CD cannot be Inserted or is Ejected Right After Insertion
Circuit diagnosis · Vehicles built from Nov 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
INSPECTION PROCEDURE
| 1. CHECK CD |
 |
Make sure that the CD is a normal audio CD, and that it is not deformed, flawed, stained, burred or otherwise defective.
- OK:
- Normal audio CD.
- HINT:
- Translucent or uniquely-shaped CDs cannot be played.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 2. CHECK THAT CD HAS BEEN INSERTED PROPERLY |
 |
Check whether or not the CD was inserted upside down.
- OK:
- CD was properly inserted.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 3. CLEAN CD |
 |
- Clean the disc by wiping the CD's dataside radially with a soft cloth.
- OK:
- Malfunction disappears.
- NOTICE:
- Do not use a conventional record cleaner or anti-static preservative.
|
OK |
 |
|
|
|
| NG |
|
 |
|
| 4. REPLACE CD |
 |
Replace the CD with a normal one and check if the same problem occurs again.
- OK:
- Malfunction disappears.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|