2011-2016 FJ Cruiser · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Jul 2007


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

G034253E01
  1. Using a screwdriver, bend the tabs of the lock washer.

  1. Remove the nut and the lock washer from the park/neutral position switch assembly.

  1. Remove the bolt and the park/neutral position switch assembly from the automatic transmission assembly.

    HINT:
    Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch assembly as the detent spring may become detached from the manual valve lever shaft.

← ON-VEHICLE INSPECTION (from Jul 2007)INSPECTION (from Jul 2007) →