2011-2016 FJ Cruiser · Service Manual RESTRAINTS

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


CUSTOMIZE SEAT BELT WARNING SYSTEM

HINT:
The following items can be customized.

CAUTION:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Customizing with the intelligent tester.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the tester on.

    4. Enter the following menus: Utility / Customize / Warning.

    5. Select the setting by referring to the table below.

      Warning 
      Display
      Default
      Content
      Setting
      Driver Side Seatbelt Warning Buzzer
      ON
      If the driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.4 mph) or more, the system sounds the seat belt warning buzzer.
      ON / OFF
      Front Passenger Side Seatbelt Warning Buzzer
      ON
      If the front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.4 mph) or more, the system sounds the seat belt warning buzzer.
      ON / OFF

← CUSTOMIZE PARAMETERS (Jul 2007 – Oct 2010)PROBLEM SYMPTOMS TABLE (Jul 2007 – Nov 2007) →