INSPECTION
Inspection · Vehicles built from Nov 2012
Versions by build date: Jul 2007 – Oct 2012 from Nov 2012
| INSPECT CHARCOAL CANISTER ASSEMBLY (for Single Tank Type) |
Visually check the charcoal canister assembly for cracks or damage. If cracks or damage is found, replace the charcoal canister assembly.
Using SST, inspect the charcoal canister assembly.

- SST
- 09992-00242
Text in Illustration *1
Port A
*2
Port B
*3
Port C
- Standard:
Measurement Condition
Specified Condition
Ports B and C closed, vacuum applied to port A [1.96 kPa (15 mmHg, 0.579 in.Hg)]
No leak
Port C closed, air blown into port A [4.71 kPa (0.05 kgf/cm2, 0.7 psi)]
Air flows from port B
Port C closed, air blown into port B [4.71 kPa (0.05 kgf/cm2, 0.7 psi)]
Air flows from port B
Air blown into port A [4.71 kPa (0.05 kgf/cm2, 0.7 psi)]
Air flows from both ports B and C
| INSPECT CHARCOAL CANISTER ASSEMBLY (for Double Tank Type) |
Visually check the charcoal canister assembly for cracks or damage. If cracks or damage is found, replace the charcoal canister assembly.
Using SST, inspect the charcoal canister assembly.

- SST
- 09992-00242
Text in Illustration *1
Port A
*2
Port B
*3
Port C
- Standard:
Measurement Condition
Specified Condition
Ports B and C closed, vacuum applied to port A [1.96 kPa (15 mmHg, 0.579 in.Hg)]
No leak
Port C closed, air blown into port A [4.71 kPa (0.05 kgf/cm2, 0.7 psi)]
Air flows from port B
Port C closed, air blown into port B [4.71 kPa (0.05 kgf/cm2, 0.7 psi)]
Air flows from port A
Air blown into port A [4.71 kPa (0.05 kgf/cm2, 0.7 psi)]
Air flows from both ports B and C
