HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built Jul 2007 – Nov 2007
Versions by build date: Jul 2007 – Nov 2007 Dec 2007 – Oct 2010 from Nov 2010
- HINT:
- Use these procedures to troubleshoot the key reminder warning system.
- *: Use a intelligent tester.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| NEXT |
|
 |
|
|
| 2.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
| NEXT |
|
 |
|
|
Result:
Result
|
Proceed to
|
Fault is not listed in problem symptoms table
|
A
|
Fault is listed in problem symptoms table
|
B
|
|
B.
|
 |
|
|
| A |
|
 |
|
|
| 4.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Terminals of ECU (Click here)
Operation Check (Click here)
Data list/ Active test (Click here)
| NEXT |
|
 |
|
|
| 5.ADJUST, REPAIR OR REPLACE |
| NEXT |
|
 |
|
|
| NEXT |
|
 |
|
|