INSPECTION
Inspection · Vehicles built from Jul 2007
| INSPECT FRONT UPPER SUSPENSION ARM |
![]() ![]() |
Flip the ball joint stud back and forth 5 times, as shown in the illustration, before installing the nut.
Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the 5th turn.
- Torque:
- 4.5 N*m{ 46 kgf*cm , 40 in.*lbf } or less
Check for any cracks and grease leakage on the ball joint dust cover.


