INSPECTION
Inspection · Vehicles built from Jul 2007
| INSPECT FRONT LOWER SUSPENSION ARM |
![]() ![]() |
Flip the ball joint stud back and forth 5 times, as shown in the illustration, before installing the nut.
Using a torque wrench, turn the nut continuously at a rate of 2 to 4 seconds per turn and take the torque reading on the 5th turn.
- Torque:
- 3.0 N*m{ 31 kgf*cm , 27 in.*lbf } or less
Check for any cracks and grease leakage on the ball joint dust cover.


