REMOVAL
Removal / installation · Vehicles built from Jul 2007
| 1. REMOVE FRONT WHEEL |
| 2. INSPECT FRONT LOWER SUSPENSION ARM |
![]() ![]() |
Install the hub nuts onto the disc.
Using a dial indicator, check the lower ball joint for excessive play when you push the hub nuts up and down with a force of 294 N (30 kgf, 66 lbf).
- Maximum:
- 0.5 mm (0.020 in.)
| 3. SEPARATE FRONT SHOCK ABSORBER WITH COIL SPRING |
![]() ![]() |
Remove the bolt, nut and washer.
Separate the front shock absorber with coil spring from the lower arm.
| 4. REMOVE FRONT LOWER SUSPENSION ARM |
![]() ![]() |
Remove the 2 bolts and separate the lower ball joint attachment from the steering knuckle.
Place matchmarks on the No. 2 camber adjust cam and toe adjust cam.

Remove the nut, No. 2 camber adjust cam, No. 1 camber adjust cam, bolt, toe adjust cam, toe adjust plate and lower arm.
Remove the cotter pin and the nut.

Using SST, remove the lower ball joint attachment.
- SST
- 09628-00011



