2011-2016 FJ Cruiser · Service Manual SUSPENSION & AXLE

INSTALLATION

Removal / installation · Vehicles built from Jul 2007


1. INSTALL FRONT STABILIZER BAR NO. 1 BUSH

G021678E03
  1. Install the 2 stabilizer bar bushes onto the stabilizer bar.

    HINT:
    1. Install the bush onto the outer side of the bush stopper on the stabilizer bar.
    2. Install the bush so that the protrusion faces inner side of the vehicle.


2. INSTALL FRONT STABILIZER BAR

G020162
  1. Install the stabilizer bar and 2 stabilizer brackets with the 4 bolts.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }


3. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

G020161
  1. Install the stabilizer link with the 2 nuts.

    Torque:
    70 N*m{ 714 kgf*cm , 52 ft.*lbf }

    HINT:
    If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.


4. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

HINT:
The installation procedure for the RH side is the same as that for the LH side.


5. INSTALL ENGINE UNDER COVER SUB-ASSEMBLY

Torque:
29 N*m{ 296 kgf*cm , 21 ft.*lbf }


6. INSTALL FRONT WHEELS

Torque:
112 N*m{ 1,137 kgf*cm , 82 ft.*lbf }

← INSPECTION (from Jul 2007)COMPONENTS (from Jul 2007) →