REMOVAL
Removal / installation · Vehicles built from Jul 2007
| 2.
REMOVE ENGINE UNDER COVER SUB-ASSEMBLY |
|
| 3.
REMOVE FRONT STABILIZER LINK ASSEMBLY LH |
 |
Remove the 2 nuts and stabilizer link.
- HINT:
- If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.
| 4.
REMOVE FRONT STABILIZER LINK ASSEMBLY RH |
 |
- HINT:
- The removal procedure for the RH side is the same as that for the LH side.
| 5.
REMOVE FRONT STABILIZER BAR |
 |
Remove the 4 bolts and 2 stabilizer brackets and remove the stabilizer bar.
| 6.
REMOVE FRONT STABILIZER BAR NO. 1 BUSH |
 |
Remove the 2 stabilizer bar bushes from the stabilizer bar.