REMOVAL
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
| 1. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
![]() ![]() |
Disengage the 2 A claws and 2 B claws.
Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 C claws and remove the parking brake hole cover.
| 2. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
Shift the shift lever into the N position.

Disengage the 5 clips and 3 claws and remove the console upper rear panel.
| 3. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY |
![]() ![]() |
Remove the lock clip and disconnect the control cable from the shift lever.
| 4. REMOVE SHIFT LEVER ASSEMBLY |
![]() ![]() |
Disconnect the shift lock control computer connector.
Disconnect the indicator light connector.
Remove the 4 bolts and the shift lever assembly.



