REMOVAL
Removal / installation · Vehicles built from Jul 2007
| 2.
DRAIN BRAKE FLUID |
 |
- NOTICE:
- Immediately wash off any brake fluid that comes into contact with painted surfaces.
| 3.
REMOVE FRONT DISC BRAKE CALIPER ASSEMBLY
|
 |
Remove the bolt and separate the brake tube bracket from the steering knuckle.
- Using SST, separate the brake tube from the disc brake cylinder.
- SST
- 09023-00101
- HINT:
- Use a container to collect the brake fluid as it drains out.
- Remove the 2 bolts and disc brake caliper assembly.
| 4.
REMOVE FRONT DISC
|
 |
Place matchmarks on the disc and the axle hub and remove the disc.
| 5.
REMOVE FRONT AXLE HUB BOLT |
 |
Using SST and a screwdriver or the equivalent to hold the axle hub, remove the hub bolt.
- SST
- 09650-17011