2011-2016 FJ Cruiser · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Aug 2008


INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

B203581E01
  1. Check the operation.

    1. Connect the battery positive (+) lead to terminal 1 and the negative (-) lead to terminal 2.

    2. Attach black tape to the forward sensor to prevent it from sensing.

    3. Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.

      HINT:
      When the environment is very bright, the antiglare operation may occur immediately after the tape is applied.

      If the result is not as specified, replace the inner rear view mirror.

← REMOVAL (from Aug 2008)INSTALLATION (from Aug 2008) →