DISPOSAL
Removal / installation · Vehicles built from Jul 2007
| 1. DISPOSE OF BRAKE BOOSTER ACCUMULATOR ASSEMBLY |
![]() ![]() |
Place the brake booster accumulator in a vise and cover it with a cloth.
Slowly cut a hole in area A on the brake booster accumulator as shown in the illustration. And discharge the gas and liquid inside.
- NOTICE:
- As gas may spray out, cover the brake booster accumulator with a cloth when performing the operation.
- Work slowly and do not cut the hole too quickly or suddenly.
- Wear protective glasses during the operation.
- As gas may spray out, cover the brake booster accumulator with a cloth when performing the operation.
When the outer body of the brake booster accumulator is cut, gas and liquid discharge.
- HINT:
- The gas is colorless, odorless and nonpoisonous nitrogen gas.
- The liquid is brake fluid.
- The gas is colorless, odorless and nonpoisonous nitrogen gas.


