2011-2016 FJ Cruiser · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built Jul 2007 – Jul 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


INSPECT ENGINE COOLANT TEMPERATURE SENSOR

Z017274E07
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 (E2) - 2 (THW)
      2.32 to 2.59 kΩ at 20°C (68°F)
      1 (E2) - 2 (THW)
      0.310 to 0.326 kΩ at 80°C (176°F)

      NOTICE:
      If checking the engine coolant temperature sensor in water, be careful not to allow water to enter the terminals. After checking, wipe the water off the engine coolant temperature sensor.

      If the result is not as specified, replace the engine coolant temperature sensor.

← REMOVAL (from Aug 2009)INSPECTION (from Aug 2009) →