2011-2016 FJ Cruiser · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSPECTION

Inspection · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


INSPECT BLOWER WITH FAN MOTOR SUB-ASSEMBLY (for LHD)

  1. I102518E01
    Check the operation.
    Text in Illustration 
    *a
    Component without harness connected
    (Blower with Fan Motor Sub-assembly)

    1. Apply battery voltage to the blower motor and check the operation of the motor.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      The blower motor operates smoothly

      If the result is not as specified, replace the blower with fan motor sub-assembly.

  1. Measure the current.

    Standard current:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Blower motor operates
    1 to 3.5 A

    If the result is not as specified, replace the blower with fan motor sub-assembly.


INSPECT BLOWER WITH FAN MOTOR SUB-ASSEMBLY (for RHD)

  1. I105877E01
    Check the operation.
    Text in Illustration 
    *a
    Component without harness connected
    (Blower with Fan Motor Sub-assembly)

    1. Apply battery voltage to the blower motor and check the operation of the motor.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      The blower motor operates smoothly

      If the result is not as specified, replace the blower with fan motor sub-assembly.

  1. Measure the current.

    Standard current:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Blower motor operates
    1 to 4 A

    If the result is not as specified, replace the blower with fan motor sub-assembly.

← INSPECTION (Jul 2007 – Oct 2010)INSTALLATION (from Jul 2007) →