2011-2016 FJ Cruiser · Service Manual BODY

DISPOSAL

Removal / installation · Vehicles built from Jul 2007

HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.


1. DISPOSE OF HOOD SUPPORT

B135983E01
  1. Horizontally fix the hood support in a vise with the piston-rod pulled out.

  1. Wearing protective glasses, using a metal saw gradually cut the shaded part between A and B, shown in the illustration, to gradually release the gas.

    Specification:
    Area
    Measurement
    a
    80 mm (3.15 in.)
    b
    20 mm (0.80 in.)

    CAUTION:
    1. Cover the area that is being cut with a shop rag or a piece of cloth because there is a possibility that metal shards may be dispersed by the gas.
    2. The gas is colorless, odorless and harmless.

← INSTALLATION (from Jul 2007)COMPONENTS (from Jul 2007) →