DISPOSAL
Removal / installation · Vehicles built from Jul 2007
| 1. DISPOSE OF BACK DOOR SUPPORT |
![]() ![]() |
Horizontally fix the back door support in a vise with the piston-rod pulled out.
Wearing protective glasses, using a metal saw gradually cut the shaded part between A and B, shown in the illustration, to gradually release the gas.
- Specification:
Area
Measurement
a
80 mm (3.15 in.)
b
20 mm (0.80 in.)
- CAUTION:
- Cover the area that is being cut with a shop rag or a piece of cloth because there is a possibility that metal shards may be dispersed by the gas.
- The gas is colorless, odorless and harmless.
- Cover the area that is being cut with a shop rag or a piece of cloth because there is a possibility that metal shards may be dispersed by the gas.


