REMOVAL
Removal / installation · Vehicles built from Jul 2007
- HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.
| 1.
REMOVE BACK DOOR TRIM COVER
|
 |
Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the back door trim cover.
| 2.
REMOVE BACK WINDOW SUPPORT |
 |
Using a screwdriver with its tip wrapped in protective tape, remove the 2 stop rings and back window support.
- NOTICE:
- Do not touch the rod of the back window support with gloves, to avoid fibers from adhering.
- When foreign matter adheres to the rod, it prevents the rod from moving smoothly and reduces its holding power.
- HINT:
- Support the back door glass by hand while removing the back window support.