INSPECTION
Inspection · Vehicles built from Jul 2007
| INSPECT OUTER MIRROR SWITCH |
![]() ![]() |
Check the resistance.
Select L on the left/right adjustment switch.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
4 (VL) - 7 (E)
4 (VL) - 8 (B)
5 (HL) - 7 (E)
5 (HL) - 8 (B)
6 (M+) - 7 (E)
6 (M+) - 8 (B)
OFF
10 kΩ or higher
4 (VL) - 8 (B)
6 (M+) - 7 (E)
UP
Below 1 Ω
4 (VL) - 7 (E)
6 (M+) - 8 (B)
DOWN
Below 1 Ω
5 (HL) - 8 (B)
6 (M+) - 7 (E)
LEFT
Below 1 Ω
5 (HL) - 7 (E)
6 (M+) - 8 (B)
RIGHT
Below 1 Ω
Select R on the left/right adjustment switch.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
2 (HR) - 7 (E)
4 (HR) - 8 (B)
3 (VR) - 7 (E)
3 (VR) - 8 (B)
6 (M+) - 7 (E)
6 (M+) - 8 (B)
OFF
10 kΩ or higher
3 (VR) - 8 (B)
6 (M+) - 7 (E)
UP
Below 1 Ω
3 (VR) - 7 (E)
6 (M+) - 8 (B)
DOWN
Below 1 Ω
2 (HR) - 8 (B)
6 (M+) - 7 (E)
LEFT
Below 1 Ω
2 (HR) - 7 (E)
6 (M+) - 8 (B)
RIGHT
Below 1 Ω


