REMOVAL
Removal / installation · Vehicles built from Jul 2007
- HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.
- Use the same procedure for both the RH and LH sides.
| 1. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY |
![]() ![]() |
Disengage the 2 claws and disconnect the side turn signal light.
Disconnect the connector and remove the side turn signal light.
| 2. REMOVE SIDE TURN SIGNAL LIGHT BULB |
![]() ![]() |
Turn the side turn signal light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.
Remove the side turn signal light bulb from the light socket.



