2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Jul 2007


INSPECT PERSONAL LIGHT ASSEMBLY

E149205E04
  1. Check the resistance.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 - 2
      OFF
      10 kΩ or higher

      If the result is not as specified, replace the personal light.

  1. Check the light operation.

    1. Connect the positive (+) battery lead to terminal 1 and the negative (-) battery lead to terminal 2, then check that the light illuminates.

      OK:
      Light illuminates.

      If the light does not illuminate, replace the bulb or light assembly.

← REMOVAL (from Jul 2007)INSTALLATION (from Jul 2007) →