2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Jul 2007


INSPECT BACK DOOR COURTESY SWITCH
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - Switch body
      ON (Shaft not pressed)
      Below 1 Ω
      1 - Switch body
      OFF (Shaft not pressed)
      10 kΩ or higher

      If the result is not as specified, replace the back door courtesy switch.

← REMOVAL (from Jul 2007)INSTALLATION (from Jul 2007) →