2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Aug 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


1. SEPARATE FRONT FENDER LINER RH
  1. Remove the 2 bolts and the 6 screws.

  1. Remove the clip and the 4 grommets and then separate the front fender liner RH.


2. DRAIN WASHER FLUID
  1. Disconnect the 2 washer hoses from the windshield washer motor and pump, and drain the washer fluid.


3. REMOVE WASHER INLET SUB-ASSEMBLY

B242135
  1. Remove the washer jar inlet filter.

  1. Disengage the claw and then remove the washer inlet.


4. REMOVE WINDSHIELD WASHER JAR ASSEMBLY

B242136
  1. Disconnect the connector.

  1. Remove the 3 bolts and the windshield washer jar assembly.


5. REMOVE FRONT WASHER MOTOR AND PUMP ASSEMBLY

  1. B242133
    Pull the washer motor and pump out of the packing of the washer jar.


6. REMOVE REAR WASHER MOTOR AND PUMP ASSEMBLY (w/ Rear Wiper)

  1. B242134
    Pull the washer motor and pump out of the packing of the washer jar.

← REMOVAL (Jul 2007 – Jul 2009)INSTALLATION (Jul 2007 – Jul 2009) →