2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Nov 2010


INSPECT UNLOCK WARNING SWITCH ASSEMBLY

  1. B135516E02
    Check the resistance.
    Text in Illustration  
    *1
    Pin
    *a
    Component without harness connected
    (Unlock Warning Switch)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Pin released
      10 kΩ or higher
      1 - 2
      Pin pushed in
      Below 1 Ω

      If the result is not as specified, replace the unlock warning switch.

← REMOVAL (from Aug 2012)INSTALLATION (Nov 2010 – Jul 2012) →