2011-2016 FJ Cruiser · Service Manual BODY

REPAIR

Removal / installation · Vehicles built from Jul 2007


1. IF NECESSARY, REPAIR DEFOGGER WIRE

  1. B106758E01
    Clean the broken wire tips with grease, wax and silicone remover.

  1. Place masking tape along both sides of the wire.

  1. B106759
    Thoroughly stir the repair agent ("Dupont" paste No. 4817 or the equivalent).

  1. Using a fine tip brush, apply a small amount of the agent to the wire.

  1. After a few minutes, remove the masking tape.

    NOTICE:
    Do not repair the defogger wire again for at least 24 hours after removing the masking tape.

← ON-VEHICLE INSPECTION (from Jul 2007)COMPONENTS (Jul 2007 – Oct 2010) →