2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built Nov 2010 – Jul 2011

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2011 from Aug 2011


INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for LHD)

  1. B135956E02
    Check the resistance of the door control switch.
    Text in Illustration 
    *a
    Component without harness connected
    (Power Window Regulator Master Switch Assembly)
    *b
    LOCK
    *c
    UNLOCK

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 (E) - 2 (L1)
      Locked
      Below 1 Ω
      OFF
      10 kΩ or higher
      1 (E) - 5 (UL1)
      Unlocked
      Below 1 Ω
      OFF
      10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch.


REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for RHD)

  1. E221659E01
    Check the resistance of the door control switch.
    Text in Illustration 
    *a
    Component without harness connected
    (Power Window Regulator Master Switch Assembly)
    *b
    LOCK
    *c
    UNLOCK

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 (L1) - 7 (E)
      Locked
      Below 1 Ω
      OFF
      10 kΩ or higher
      9 (UL1) - 7 (E)
      Unlocked
      Below 1 Ω
      OFF
      10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch.

← INSPECTION (Jul 2007 – Oct 2010)INSPECTION (from Aug 2011) →