2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


CUSTOMIZE LIGHTING SYSTEM

HINT:
The following items can be customized.

CAUTION:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Customizing with the intelligent tester.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the tester on.

    4. Enter the following menus: Utility / Customize / Illuminated Entry.

    5. Select the setting by referring to the table below.

      Illuminated Entry 
      Display
      Default
      Content
      Setting
      I/L when ACC OFF
      ON
      Lights up the room light, rear room light and ignition switch illumination when the ignition switch is turned from ACC to off.
      ON/OFF
      Lighting Time
      15 s
      Changes the lighting time of the room light, rear room light and ignition switch illumination after closing all of the doors. (It will quickly fade out in case of turning the ignition switch to ON.)
      7.5/15/30 (s)
      I/L ON W/ Unlock
      ON
      Lights up the room light, rear room light and ignition switch illumination when a door is unlocked.
      ON/OFF

← CUSTOMIZE PARAMETERS (Jul 2007 – Oct 2010)PROBLEM SYMPTOMS TABLE (Jul 2007 – Oct 2010) →