Removal / installation · Vehicles built from Aug 2011
1.
REMOVE REAR DECK TRIM COVER
Disengage the 6 claws and 2 guides and remove the rear deck trim cover.
Text in Illustration
*1
Protective Tape
Disconnect the 2 connectors.
2.
REMOVE REAR POWER POINT SOCKET ASSEMBLY
HINT:
Use the same procedure as for the opposite side.
Using a screwdriver with its tip wrapped in protective tape, disengage the claw, then turn the power outlet socket counterclockwise and push the power outlet socket half way out.
Text in Illustration
*1
Protective Tape
Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and then push the power outlet socket out.
3.
REMOVE REAR POWER OUTLET SOCKET COVER
HINT:
Use the same procedure as for the opposite side.
Disengage the 2 claws and remove the power outlet socket cover.