62-78 DSP Error
Diagnostic trouble codes · Vehicles built from Nov 2010
Also covers:
- 63-78 DSP Error
DESCRIPTION
| DTC No. |
DTC Detection Condition |
Trouble Area |
| 62-78 |
An error occurs during the decode process (MP3/WMA). |
Radio receiver assembly |
| 63-78 |
An error occurs during the decode process (MP3/WMA). |
INSPECTION PROCEDURE
- HINT:
- After the inspection is completed, clear the DTCs.
- NOTICE:
- These codes may be output even if there is no malfunction.
- If these codes are output frequently, replace the radio receiver assembly (Click here).
- These codes may be output even if there is no malfunction.
| 1. CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs and check if the same trouble occurs again.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
