INSTALLATION
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
| 1.
INSTALL RADIO RECEIVER ASSEMBLY |
 |
- Connect the plug, the head unit connector and the 2 radio connectors.
- Align the 2 bosses of the radio bracket with the hole in the instrument panel and install the radio receiver with the 4 bolts.
-
Torque:
- 2.5 N*m{
25 kgf*cm
, 22 in.*lbf
}
| 2.
INSTALL INTEGRATION CONTROL PANEL ASSEMBLY
|
 |
- Connect the blower switch connector and the 2 air conditioner amplifier connectors.
Engage the 4 clips and install the front passenger seat belt warning light.
Tighten the 2 screws.
| 3.
INSTALL INSTRUMENT PANEL GARNISH RH
|
 |
- Engage the 3 clips and install the instrument panel garnish.
Install screw <H>.
| 4.
INSTALL INSTRUMENT PANEL GARNISH LH
|
 |
- Engage the 3 clips and install the instrument panel garnish.
Install 2 <H> screws.
| 5.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 3.9 N*m{
40 kgf*cm
, 35 in.*lbf
}