2011-2016 FJ Cruiser · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


1. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

C129547
  1. Connect the control cable to the transmission with the nut and a new clip.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }

  1. C129546
    Connect the control cable to the body with the 2 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. C129545
    Engage the 3 claws to connect the control cable.

  1. C129544
    Connect the control cable to the body with the 2 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. C129554
    Connect the control cable with a new lock clip.


2. REMOVE FRONT CONSOLE BOX
  1. Engage the 5 guides and install the front console box.

  1. Install the 4 <H> bolts.


3. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
  1. Engage the 3 guides and 5 clips and install the console upper rear panel.


4. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY

  1. B271483
    Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 guides.

  1. Engage the 4 claws and install the parking brake hole cover.

← INSTALLATION (Jul 2007 – Oct 2010)COMPONENTS (from Jul 2007) →