REMOVAL
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
| 1.
REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY
|
 |
Disengage the 2 A claws and 2 B claws.
Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 C claws and remove the parking brake hole cover.
| 2.
REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
|
 |
- Shift the shift lever into the N position.
Disengage the 5 clips and 3 claws and remove the console upper rear panel.
| 3.
REMOVE FRONT CONSOLE BOX
|
 |
- Remove the 4 <D> bolts.
Disengage the 5 claws and remove the console box.
| 4.
REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY |
 |
Remove the lock clip and disconnect the control cable from the shift lever.
- Remove the 2 nuts and disconnect the control cable from the vehicle body.
- Disengage the 3 claws and disconnect the control cable.
- Remove the 2 nuts and disconnect the control cable from the vehicle body.
- Remove the nut and clip then disconnect the control cable.