INSTALLATION
Removal / installation · Vehicles built from Aug 2012
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012
- HINT:
- The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
| 1.
INSTALL ROOF SPEAKER ASSEMBLY |
 |
- Install the roof speaker by turning it in the direction of the arrow shown in the illustration.
Tighten the screw.
Connect the speaker connector.
- Cover the engaged portion of the connector and the lead line with a new hole cover, and attach them to the roof headlining securely.
- NOTICE:
- Securely attach the hole cover to the roof headlining to avoid looseness in the connector and the lead line.
| 2.
INSTALL ROOF HEADLINING |
 |
Install the roof headlining with the 4 clips.
Engage the 4 clamps.
| 3.
INSTALL PERSONAL LIGHT ASSEMBLY (w/ CRAWL)
|
 |
- Install the 4 new clips to the personal light assembly.
Connect the connector.
Engage the 4 clips and 4 guides to install the personal light assembly.
| 4.
INSTALL ROOM LIGHT ASSEMBLY
|
 |
- HINT:
- The procedure described below is for the front side. Use the same procedure for both the front and rear sides, unless otherwise specified.
- for Front Side:
Engage the 4 claws and install the room light switch base.
Insert the 2 wire harnesses into the 2 claws of the room light.
- for Rear Side:
Engage the 4 claws and install the room light switch base.
Insert the wire harness into the claw of the room light.
- Engage the 4 claws and install the room light.
- Engage the 4 claws and install the room light lens.
| 5.
INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror) |
 |
(Click here)
| 6.
INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror) |
 |
(Click here)
| 7.
INSTALL VISOR HOLDER
|
 |
- HINT:
- Use the same procedure for both sides.
Text in Illustration
*a
|
for RH Side
|
*b
|
for LH Side
|
Engage the 2 claws by turning the visor holder clockwise between 60 to 120° and install the visor holder.
| 8.
INSTALL VISOR ASSEMBLY RH
|
 |
Install the visor with the 2 screws.
Install the visor support shaft into the visor holder.
| 9.
INSTALL VISOR ASSEMBLY LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 10.
INSTALL COAT HOOK
|
 |
- HINT:
- Use the same procedure for both sides.
Install the coat hook with the bolt.
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
- Engage the claw and close the cover.
Text in Illustration
*a
|
for RH Side
|
*b
|
for LH Side
|
| 11.
INSTALL ROOF HEADLINING HOLE PLUG (w/ Curtain Shield Airbag)
|
 |
- HINT:
- Use the same procedure for both sides.
Engage the claw and install the roof headlining hole plug.
Install the bolt.
-
Torque:
- 5.5 N*m{
56 kgf*cm
, 49 in.*lbf
}
- Engage the 3 claws and close the cover.
Text in Illustration
*a
|
for RH Side
|
*b
|
for LH Side
|
| 12.
INSTALL ROOF SIDE INNER GARNISH RH
|
 |
Pass the rear seat outer belt through the slit in the roof side inner garnish.
Engage the 7 clips and the guide and install the roof side inner garnish.
Install the bolt.
-
Torque:
- 5.5 N*m{
56 kgf*cm
, 49 in.*lbf
}
Install the clip.
- Engage the claw and close the cover.
| 13.
INSTALL ROOF SIDE INNER GARNISH LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 14.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
|
 |
w/ Rear Power Outlet Socket:
Connect the 2 connectors.
Engage the 6 clips and the 8 claws and install the deck trim side panel.
Install the 3 screws.
Install the bolt.
-
Torque:
- 5.5 N*m{
56 kgf*cm
, 49 in.*lbf
}
| 15.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
|
 |
Engage the 6 clips and the 8 claws and install the deck trim side panel.
Install the 3 screws.
| 16.
INSTALL REAR SEAT OUTER BELT ASSEMBLY RH
|
 |
Install the anchor plate with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
Make sure that the anchor plate rotates smoothly.
| 17.
INSTALL REAR SEAT OUTER BELT ASSEMBLY LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 18.
INSTALL LAP BELT OUTER ANCHOR COVER
|
 |
- HINT:
- Use the same procedure for both sides.
Engage the 3 claws and install the lap belt outer anchor cover.
| 19.
INSTALL AMPLIFIER BOX SPEAKER ASSEMBLY (w/ Woofer)
|
 |
Install the amplifier box speaker with the 4 screws.
-
Torque:
- 8.1 N*m{
83 kgf*cm
, 72 in.*lbf
}
Connect the connectors.
| 20.
INSTALL SPEAKER MOUNTING COVER (w/ Woofer)
|
 |
Engage the 8 clips and 2 guides and install the speaker mounting cover.
| 21.
INSTALL DECK SIDE GARNISH (w/ Woofer)
|
 |
Engage the 6 claws and install the deck side garnish.
| 22.
INSTALL QUARTER TRIM POCKET (w/o Woofer)
|
 |
Engage the 6 claws and install the quarter trim pocket.
| 23.
INSTALL SIDE TRIM COVER (w/o Woofer)
|
 |
Engage the 6 claws and the 2 guides and install the side trim cover.
| 24.
INSTALL QUARTER TRIM POCKET TRAY (w/o Woofer)
|
 |
Engage the 7 claws and install the quarter trim pocket tray.
| 25.
INSTALL PACKAGE HOLDER NET HOOK
|
 |
- HINT:
- Use the same procedure to install all the package holder net hooks.
Install the package holder net hook with the bolt.
-
Torque:
- 8.1 N*m{
83 kgf*cm
, 72 in.*lbf
}
| 26.
INSTALL FRONT PILLAR GARNISH RH
|
 |
w/ Assist Grip:
Engage the guide and the 2 clips and install the front pillar garnish.
w/o Assist Grip:
Engage the guide and the 2 clips and install the front pillar garnish.
Install the bolt.
- Engage the claw and close the cover.
| 27.
INSTALL FRONT PILLAR GARNISH LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 28.
INSTALL VISOR SUB-ASSEMBLY RH
|
 |
Engage the 2 claws and install the visor sub-assembly.
| 29.
INSTALL VISOR SUB-ASSEMBLY LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 30.
INSTALL ASSIST GRIP ASSEMBLY
|
 |
- HINT:
- Use the same procedure to install all the assist grips.
Install the assist grip with the 2 bolts.
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
| 31.
INSTALL ASSIST GRIP PLUG
|
 |
- HINT:
- Use the same procedure to install all the assist grip plugs.
Text in Illustration
*a
|
for RH Side
|
*b
|
for LH Side
|
Engage the 2 claws and install the assist grip plug.
| 32.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
|
 |
- Align the locating marks with the paint marks first, and install the front door opening trim weatherstrip, as shown in the illustration.
Text in Illustration
*a
|
Locating Mark
|
*b
|
Paint Mark
|
- Paint mark:
Area
|
Color
|
RH side
|
White
|
LH side
|
Red
|
| 33.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 34.
INSTALL ROOF SIDE RAIL GARNISH RH
|
 |
Engage the guide and the claws and install the roof side rail garnish.
Install the 2 bolts.
| 35.
INSTALL ROOF SIDE RAIL GARNISH LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 36.
INSTALL ROOF SIDE INNER GARNISH COVER RH
|
 |
- HINT:
- Use the same procedure for both sides.
Engage the 2 claws and install the roof side inner garnish cover.
| 37.
INSTALL ROOF SIDE INNER GARNISH COVER LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 38.
INSTALL COWL SIDE TRIM BOARD RH
|
 |
Engage the 2 claws and install the cowl side trim board.
Install the clip.
| 39.
INSTALL COWL SIDE TRIM BOARD LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 40.
INSTALL FOOTREST CLIP (for LHD)
|
 |
- HINT:
- Use the same procedure for both sides.
Engage the 2 claws and install the footrest clip.
| 41.
INSTALL FRONT FLOOR FOOTREST (for LHD)
|
 |
- Engage the 2 studs and install the front floor footrest.
| 42.
INSTALL ACCESS DOOR SCUFF PLATE RH
|
 |
Engage the 6 claws and install the access door scuff plate.
| 43.
INSTALL ACCESS DOOR SCUFF PLATE LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 44.
INSTALL FRONT DOOR SCUFF PLATE RH
|
 |
Engage the 14 claws and install the door scuff plate.
| 45.
INSTALL FRONT DOOR SCUFF PLATE LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 46.
INSTALL REAR FLOOR MAT ASSEMBLY
|
 |
Install the rear floor mat with the 2 clips.
| 47.
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
|
 |
- HINT:
- Use the same procedure for both sides.
Install the luggage hold belt striker with the bolt.
-
Torque:
- 18 N*m{
184 kgf*cm
, 13 ft.*lbf
}
Install the cap.
| 48.
INSTALL REAR FLOOR MAT SUPPORT PLATE
|
 |
Engage the 11 claws and install the rear floor mat support plate.
Install the 5 screws.
| 49.
INSTALL REAR FLOOR BOARD
|
 |
Engage the clip and claw and install the rear floor board.
- Install the luggage hold belt striker with the bolt.
Text in Illustration
*1
|
Guide
|
*a
|
for RH Side
|
*b
|
for LH Side
|
-
Torque:
- 18 N*m{
184 kgf*cm
, 13 ft.*lbf
}
- HINT:
- Use the same procedure for both sides.
| 50.
INSTALL REAR SEATBACK ASSEMBLY RH
|
 |
- Engage the hook and temporarily install the rear seatback with the 2 bolts.
Tighten the 2 bolts in the sequence shown in the illustration.
-
Torque:
- 37 N*m{
375 kgf*cm
, 27 ft.*lbf
}
Pull up the rear seatback.
- Install the rear seat inner belt into the rear seatback holder.
Install the anchor plate of the rear center seat outer belt with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
- NOTICE:
- Do not place the anchor plate over the convex area of the rear seat inner belt.
| 51.
INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH
|
 |
- Pull the rear seatback lock release button and tilt the rear seatback forward.
Engage the 10 clips and install the rear seatback board carpet.
Pull up the rear seatback.
| 52.
INSTALL REAR SEATBACK ASSEMBLY LH
|
 |
- Engage the hook and temporarily install the rear seatback with the 2 bolts.
Tighten the 2 bolts in the sequence shown in the illustration.
-
Torque:
- 37 N*m{
375 kgf*cm
, 27 ft.*lbf
}
Install the rear center seat inner belt into the rear seatback holder.
| 53.
INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH
|
 |
- Engage the 8 clips and install the rear seatback board carpet.
Pull up the rear seatback.