REMOVAL
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
- HINT:
- The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 3.
REMOVE FRONT SPEAKER BRACKET |
 |
- Remove the 2 bolts and the front speaker bracket.
Disconnect the speaker connector.
| 4.
REMOVE FRONT NO. 2 SPEAKER ASSEMBLY |
 |
- Remove the clamp.
Remove the 2 bolts and the front No. 2 speaker.