2011-2016 FJ Cruiser · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built Jul 2007 – Jul 2009


INSPECT HEATED OXYGEN SENSOR

A128845E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance (for Bank 1):
      Tester Connection
      Specified Condition
      1 (HT1B) - 2 (+B)
      11 to 16 Ω at 20°C (68°F)
      1 (HT1B) - 4 (E2)
      10 kΩ or higher

      Standard resistance (for Bank 2):
      Tester Connection
      Specified Condition
      1 (HT2B) - 2 (+B)
      11 to 16 Ω at 20°C (68°F)
      1 (HT2B) - 4 (E2)
      10 kΩ or higher

← REMOVAL (Jul 2007 – Jul 2009)INSTALLATION (Jul 2007 – Jul 2009) →