REMOVAL
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Jul 2007 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014
| 1.
REMOVE RADIATOR GRILLE |
 |
- Using a clip remover, remove the 2 clips.
Remove the 2 screws.
Disengage the 5 clips and remove the radiator grille.
| 2.
REMOVE FRONT BUMPER COVER |
 |
- Apply protective tape as shown in the illustration.
Text in Illustration
*a
|
Protective Tape
|
- Using a clip remover, remove the 5 clips.
- Remove the 8 screws and 4 bolts.
- Disengage the 2 claws and remove the front bumper cover.
- Remove the 4 clips.
| 3.
REMOVE FRONT BUMPER SIDE SUPPORT LH |
 |
- Remove the 2 screws.
Disengage the 2 claws and remove the front bumper side support LH.
| 4.
REMOVE FRONT BUMPER SIDE SUPPORT RH |
 |
- HINT:
- Use the same procedure as for the LH side.
| 5.
REMOVE FRONT BUMPER FILLER LH |
 |
- Disengage the clip and the 2 claws and remove the front bumper filler LH.
| 6.
REMOVE FRONT BUMPER FILLER RH |
 |
- HINT:
- Use the same procedure as for the LH side.
| 7.
REMOVE FRONT BUMPER UPPER RETAINER |
 |
- Remove the 3 bolts.
Disengage the 2 hooks and remove the front bumper upper retainer.
| 8.
REMOVE FRONT BUMPER REINFORCEMENT |
 |
- Remove the 4 nuts and the front bumper reinforcement.
| 9.
REMOVE FRONT SUSPENSION MEMBER DAMPER ASSEMBLY (w/ Performance Damper) |
 |
- Remove the 2 nuts and front suspension member damper assembly.
- NOTICE:
- Do not compress or extend the front suspension member damper assembly or rotate the rod.
| 10.
REMOVE FRONT BUMPER EXTENSION LH |
 |
- Remove the 4 nuts and front bumper extension LH.
| 11.
REMOVE FRONT BUMPER EXTENSION RH |
 |
- HINT:
- Use the same procedure as for the LH side.