INSTALLATION
Removal / installation · Vehicles built from Jul 2007
| 1. INSTALL DOOR CONTROL SWITCH |
Engage the 2 claws and install the door control switch.

| 2. INSTALL FRONT ARMREST BASE UPPER PANEL |
![]() ![]() |
Connect the connector.
Engage the 3 claws and clip and install the front armrest base upper panel.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

