2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Aug 2012

Versions by build date: Nov 2010 – Jul 2012 from Aug 2012


1. INSTALL UNLOCK WARNING SWITCH ASSEMBLY
  1. Engage the 2 claws and install the unlock warning switch.

  1. C198000E02
    Connect terminals 3 and 4 of the un-lock warning switch connector.
    Text in Illustration 
    *1
    Secondary Locking Device

    HINT:
    Check that the harness is securely inserted by pulling it.

  1. Engage the secondary locking device.

  1. Connect the un-lock warning switch connector to the ignition or starter switch.

  1. Connect the connector.

  1. E218470
    Install new cable tie as shown in the illustration.


2. INSTALL TRANSPONDER KEY AMPLIFIER

  1. E149558
    Engage the 2 claws and install the transponder key amplifier.

  1. Connect the connector.


3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL
  1. Connect the connectors.

  1. Engage the 8 clips and 4 guides and install the lower instrument panel finish panel.

  1. Install the 2 <E> bolts.


4. INSTALL INSTRUMENT PANEL FINISH PLATE

  1. E149563E03
    Install the instrument panel finish plate.
    Text in Illustration 
    *1
    Instrument Panel Finish Plate


5. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
  1. Engage the 3 claws and install the fuel lid lock open lever.


6. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
  1. Engage the 3 claws and install the hood lock control lever.


7. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
  1. Engage the 4 clips and 2 claws and install the instrument panel register.


8. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
  1. Install the front door opening trim weatherstrip.


9. INSTALL COWL SIDE TRIM BOARD RH
  1. Engage the 2 claws and install the cowl side trim board.

  1. Install the clip.


10. INSTALL FRONT DOOR SCUFF PLATE RH
  1. Engage the 14 claws and install the door scuff plate.

← INSTALLATION (Nov 2010 – Jul 2012)COMPONENTS (from Jul 2007) →