2011-2016 FJ Cruiser · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jul 2007


1. INSTALL OUTER REAR VIEW MIRROR ILLUMINATION LIGHT BULB (w/ Illumination)

E127191
  1. Install the outer rear view mirror illumination light bulb into the light socket.

  1. Turn the outer rear view mirror illumination light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.


2. INSTALL OUTER REAR VIEW MIRROR

B138151
  1. Engage the 2 claws on the upper side of the mirror and the 6 clips and install the mirror.

    HINT:
    Heating the mirror holder with a domestic dryer before this procedure makes the work easier.

  1. B135564
    Install the outer rear view mirror with the 3 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the connector.


3. INSTALL NO. 2 FRONT DOOR SERVICE HOLE COVER

HINT:
Use the same procedure as for the RH side (Click here).


4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

HINT:
Use the same procedure as for the RH side (Click here).


5. INSTALL FRONT ARMREST BASE UPPER PANEL

  1. B135565
    Connect the connector.

  1. Engage the 3 claws and clip and install the front armrest base upper panel.


6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

← INSPECTION (from Jul 2007)COMPONENTS (from Jul 2007) →