2011-2016 FJ Cruiser · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Jul 2007


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE REAR WHEEL

3. REMOVE REAR SPEED SENSOR

C133069
  1. Disconnect the skid control sensor wire.

  1. Remove the nut and rear speed sensor.

    NOTICE:
    1. Do not attach any foreign matter to the sensor tip.
    2. Ensure that no foreign matter enters the sensor installation part.

← COMPONENTS (from Jul 2007)INSPECTION (from Jul 2007) →